Sullair Portable Compressor: 200-425cfm

 

200psi

Sullair’s 200 – 425 cfm, 200 psig portable compressors: our high/low pressure selector valve allows dual pressure capabiilty without making mechanical adjustments


Sullair 300HH Interim 4 Portable

The Sullair 300HH iT4 rotary screw portable air compressor delivers 300 cfm at 200 psig or 8.4 m3/min at 14 bar. Available with a choice of Caterpillar or John Deere interim Tier 4 emission-compliant engines, this redesigned product family features an improved diagnostic electronic control system with user-friendly gauges and LCD text display of the run condition and fault codes explanations. Other new features include a full fluid containment retention frame to protect against accidental spills; large, padlockable service doors with gas assist springs that provide easy access to the fuel tank, engine, air filters and tool compartment; and optional forklifts.

 

 

 

  • 300 cfm (8.4 m3/min, 142 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engines: interim Tier 4 John Deere 122 hp (91.0 kW) or interim Tier 4 Caterpillar 122 hp (91.0 kW)

  • Rotary screw compressor
  • Two-stage dry-type filters
  • Full fluid containment retention frame
  • Cold box design
  • Adjustable height hitch
  • E-Z lube axle
  • Curbside instrument panel
  • Gauges and LCD graphic display on the controller
  • Idle warm-up valve
  • Rocker type start switch
  • Emergency stop
  • Fuel/water separator
  • 0 to 100% capacity control
  • Automatic inlet valve
  • Integral glow plug starting aids
  • Durable powder coat finish
  • AWF™ compressor fluid

  • Aftercooler and filtration for instrument quality air
  • Fork lift pockets
  • Block heater
  • Hose reels (single and dual) and pneumatic hoses
  • Spark arrestor muffler
  • Mechanical parking brakes
  • Ball hitch
  • Air filter maintenance indicators

Click to download Datasheet

Sullair 300HH AF Interim Tier 4 Portable

The Sullair 300HH AF iT4 delivers 300 cfm at 200 psig or 8.4 m3/min at 14 bar of aftercooled and filtered compressed air that meets or exceeds ISO 8573-1: Class 1.7.1 quality standards.

The AF System consists of a specially designed Sullair portable compressor with a built-in high-capacity, low-approach aftercooler, a water-condensate trap and a highly efficient contaminant removal system.

The contaminant removal system includes primary and secondary filters with condensate traps. The primary filter is a coalescing type filter which captures and removes particles down to 1.0 micron and larger in diameter, and maximum remaining aerosol content at 0.5 PPM. The secondary filter is a high efficiency coalescing type which removes particulate to 0.01 micron and larger in diameter, and maximum aerosol content of 0.01 PPM.

  • 300 cfm (8.4 m3/min, 142 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engines: interim Tier 4 John Deere 122 hp (91.0 kW) or interim Tier 4 Caterpillar 122 hp (91.0 kW)

  • Rotary screw compressor
  • Instrument quality air as per ISO 8573.1:Class 1.7.1
  • Low-approach aftercooler and moisture separator
  • Two-stage dry-type filters
  • Full fluid containment retention frame
  • Cold box design
  • Adjustable height hitch
  • E-Z lube axle
  • Curbside instrument panel
  • Gauges and LCD graphic display on the controller
  • Idle warm-up valve
  • Rocker type start switch
  • Emergency stop
  • Fuel/water separator
  • 0 to 100% capacity control
  • Automatic inlet valve
  • Integral glow plug starting aids
  • Durable powder coat finish
  • AWF™ compressor fluid

  • Fork lift pockets
  • Block heater
  • Hose reels (single and dual) and pneumatic hoses
  • Spark arrestor muffler
  • Mechanical parking brakes
  • Ball hitch
  • Air filter maintenance indicators

Click to download Datasheet

Sullair 300HH Tier 3 Portable

The Sullair 300HH rotary screw portable air compressor delivers 300 cfm at 200 psig or 8.5 m3/min at 14 bar. Unit is designed for reliability and total accessibility featuring large side doors for easy maintenance. Powered by either a John Deere or Caterpillar Tier 3 emissions compliant engine. Mounting option is 2-wheel, single axle. Enclosure is made of durable powder coated Galvanneal sheet metal with composite end caps. Other features include independent rubber torsion suspension, wheel bearing grease fittings, and a lockable curbside instrument panel. The compressors feature a pneumatic inlet valve and 0 to 100% capacity control.

  • 300 cfm (8.5 m3/min, 142 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engines: Tier 3 John Deere 140 hp (104 kW) or Tier 3 Caterpillar 130 hp (97 kW)

  • Rotary Screw Compressor
  • Removable Multi-Piece Canopy
  • Adjustable Height Hitch
  • E-Z Lube Axle
  • Large Tool Box Compartment
  • Curbside Instrument Panel
  • SSAM—Shutdown System And Annunciation Module
  • Rocker Type Start Switch
  • Idle Warm-up Valve
  • Battery Disconnect Switch
  • Emergency Stop
  • Protective Shutdown Switches
  • Fuel/Water Separator
  • Three-stage Air Filters
  • 0 to 100% Capacity Control
  • Pneumatic Inlet Valve
  • AWF™ Compressor Fluid
  • Durable Powder Coat Finished
  • Wide Track
  • Galvanneal Sheet Metal
  • Recessed Tail Lights
  • Rear Bumper

  • Aftercooler
  • Air filter maintenance indicators
  • Ball hitch
  • Block heater
  • Brakes
  • Cold weather starting aid
  • Ether starting aid (John Deere)
  • Filtration for instrument quality air
  • Fuel level gauge
  • Gauge package (Caterpillar)
  • Hose reels, single and dual
  • Mechanical parking brakes
  • Spark arrestor
  • Special paint
  • Tachometer (Caterpillar)

Click to download Datasheet

Sullair 300HH AF System Tier 3 Portable

The Sullair 300HH AF System delivers 300 cfm at 200 psig or 8.5 m3/min at 14 bar of aftercooled and filtered compressed air that meets or exceeds ISO 8573-1: Class 1.7.1 quality standards.

The AF System consists of a specially designed Sullair portable compressor with a built-in high-capacity, low-approach aftercooler, a water-condensate trap and a highly efficient contaminant removal system.

The contaminant removal system includes primary and secondary filters with condensate traps. The primary filter is a coalescing type filter which captures and removes particles down to 1.0 micron and larger in diameter, and maximum remaining aerosol content at 0.5 PPM. The secondary filter is a high efficiency coalescing type which removes particulate to 0.01 micron and larger in diameter, and maximum aerosol content of 0.01 PPM.

  • 300 cfm (8.5 m3/min, 142 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engines: Tier 3 John Deere 140 hp (104 kW) or Tier 3 Caterpillar 130 hp (97 kW)

  • Rotary Screw Compressor
  • Instrument Quality Air as per ISO 8573.1:Class 1.7.1
  • Low-approach Aftercooler and Moisture Separator
  • Primary and Secondary Filtration
  • Environmentally Friendly
  • 0 to 100% Capacity Control
  • Two-stage Air Filters
  • Curbside Instrument Panel
  • Rocker Type Start Switch
  • Idle Warm-up Valve
  • SSAM—Shutdown System and Annunciation Module
  • Protective Shutdown Switches
  • AWF™ Compressor Fluid
  • Bumper with Recessed Tail Lights

  • Differential Pressure Shutdown System for Filters
  • Air filter maintenance indicators
  • Ball hitch
  • Block heater
  • Brakes
  • Cold weather starting aid
  • Ether starting aid (John Deere)
  • Filtration for instrument quality air
  • Fuel level gauge
  • Gauge package (Caterpillar)
  • Hose reels, single and dual
  • Mechanical parking brakes
  • Spark arrestor
  • Special paint
  • Tachometer (Caterpillar)

Click to download Datasheet

Sullair 300HH Tier 2 Portable

The Sullair 300HH rotary screw portable air compressor delivers 300 cfm at 200 psig or 8.5 m3/min at 14 bar. Unit is designed for reliability and total accessibility featuring large side doors for easy maintenance. Powered by a Tier 2 emissions compliant Caterpillar engine. Mounting option is 2-wheel, single axle. Enclosure is made of durable powder coated Galvanneal sheet metal with composite end caps. Other features include independent rubber torsion suspension, wheel bearing grease fittings, and a lockable curbside instrument panel. The compressors feature a pneumatic inlet valve and 0 to 100% capacity control.

  • 300 cfm (8.5 m3/min, 142 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engine: Tier 2 Caterpillar 129 hp (96 kW)

  • Rotary Screw Compressor
  • Removable Multi-Piece Canopy
  • Adjustable Height Hitch
  • E-Z Lube Axle
  • Large Tool Box Compartment
  • Curbside Instrument Panel
  • SSAM—Shutdown System And Annunciation Module
  • Rocker Type Start Switch
  • Idle Warm-up Valve
  • Battery Disconnect Switch
  • Emergency Stop
  • Protective Shutdown Switches
  • Fuel/Water Separator
  • Three-stage Air Filters
  • 0 to 100% Capacity Control
  • Pneumatic Inlet Valve
  • AWF™ Compressor Fluid
  • Durable Powder Coat Finished
  • Wide Track
  • Galvanneal Sheet Metal
  • Recessed Tail Lights
  • Rear Bumper

  • Air filter maintenance indicators
  • Ball hitch
  • Block heater
  • Brakes
  • Cold weather starting aid
  • Filtration for instrument quality air
  • Fuel level gauge
  • Gauge package
  • Hose reels, single and dual
  • Mechanical parking brakes
  • Spark arrestor
  • Special paint
  • Tachometer

Click to download Datasheet

Sullair 300HH AF System Tier 2 Portable

The Sullair 300HH AF System delivers 300 cfm at 200 psig or 8.5 m3/min at 14 bar of aftercooled and filtered compressed air that meets or exceeds ISO 8573-1: Class 1.7.1 quality standards.

The AF System consists of a specially designed Sullair portable compressor with a built-in high-capacity, low-approach aftercooler, a water-condensate trap and a highly efficient contaminant removal system.

The contaminant removal system includes primary and secondary filters with condensate traps. The primary filter is a coalescing type filter which captures and removes particles down to 1.0 micron and larger in diameter, and maximum remaining aerosol content at 0.5 PPM. The secondary filter is a high efficiency coalescing type which removes particulate to 0.01 micron and larger in diameter, and maximum aerosol content of 0.01 PPM.

  • 300 cfm (8.5 m3/min, 142 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engine: Tier 2 Caterpillar 129 hp (96 kW)

  • Rotary Screw Compressor
  • Instrument Quality Air as per ISO 8573.1:Class 1.7.1
  • Low-approach Aftercooler and Moisture Separator
  • Primary and Secondary Filtration
  • Environmentally Friendly
  • 0 to 100% Capacity Control
  • Two-stage Air Filters
  • Curbside Instrument Panel
  • Rocker Type Start Switch
  • Idle Warm-up Valve
  • SSAM—Shutdown System and Annunciation Module
  • Protective Shutdown Switches
  • AWF™ Compressor Fluid
  • Bumper with Recessed Tail Lights

  • Differential Pressure Shutdown System for Filters
  • Air filter maintenance indicators
  • Ball hitch
  • Block heater
  • Brakes
  • Cold weather starting aid
  • Filtration for instrument quality air
  • Fuel level gauge
  • Gauge package
  • Hose reels, single and dual
  • Mechanical parking brakes
  • Spark arrestor
  • Special paint
  • Tachometer

Click to download Datasheet

Sullair 375HH Interim Tier 4 Portable

The Sullair 300HH iT4 rotary screw portable air compressor delivers 375 cfm at 200 psig or 10.6 m3/min at 14 bar. Available with a choice of Caterpillar or John Deere interim Tier 4 emission-compliant engines, this redesigned product family features an improved diagnostic electronic control system with user-friendly gauges and LCD text display of the run condition and fault codes explanations. Other new features include a full fluid containment retention frame to protect against accidental spills; large, padlockable service doors with gas assist springs that provide easy access to the fuel tank, engine, air filters and tool compartment; and optional forklifts.

  • 375 cfm (10.6 m3/min, 177 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engines: interim Tier 4 John Deere 139 hp (103.7 kW) or interim Tier 4 Caterpillar 142 hp (105.9 kW)

  • Rotary screw compressor
  • Two-stage dry-type filters
  • Full fluid containment retention frame
  • Cold box design
  • Adjustable height hitch
  • E-Z lube axle
  • Curbside instrument panel
  • Gauges and LCD graphic display on the controller
  • Idle warm-up valve
  • Rocker type start switch
  • Emergency stop
  • Fuel/water separator
  • 0 to 100% capacity control
  • Automatic inlet valve
  • Integral glow plug starting aids
  • Durable powder coat finish
  • AWF™ compressor fluid

  • Aftercooler and filtration for instrument quality air
  • Fork lift pockets
  • Block heater
  • Hose reels (single and dual) and pneumatic hoses
  • Spark arrestor muffler
  • Mechanical parking brakes
  • Ball hitch
  • Air filter maintenance indicators

Click to download Datasheet

Sullair 375HH AF Interim Tier 4 Portable

The Sullair 375HH AF iT4 delivers 375 cfm at 200 psig or 10.6 m3/min at 14 bar of aftercooled and filtered compressed air that meets or exceeds ISO 8573-1: Class 1.7.1 quality standards.

The AF System consists of a specially designed Sullair portable compressor with a built-in high-capacity, low-approach aftercooler, a water-condensate trap and a highly efficient contaminant removal system.

The contaminant removal system includes primary and secondary filters with condensate traps. The primary filter is a coalescing type filter which captures and removes particles down to 1.0 micron and larger in diameter, and maximum remaining aerosol content at 0.5 PPM. The secondary filter is a high efficiency coalescing type which removes particulate to 0.01 micron and larger in diameter, and maximum aerosol content of 0.01 PPM.

  • 375 cfm (10.6 m3/min, 177 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engines: interim Tier 4 John Deere 139 hp (103.7 kW) or interim Tier 4 Caterpillar 142 hp (105.9 kW)

  • Rotary screw compressor
  • Instrument quality air as per ISO 8573.1:Class 1.7.1
  • Low-approach aftercooler and moisture separator
  • Two-stage dry-type filters
  • Full fluid containment retention frame
  • Cold box design
  • Adjustable height hitch
  • E-Z lube axle
  • Curbside instrument panel
  • Gauges and LCD graphic display on the controller
  • Idle warm-up valve
  • Rocker type start switch
  • Emergency stop
  • Fuel/water separator
  • 0 to 100% capacity control
  • Automatic inlet valve
  • Integral glow plug starting aids
  • Durable powder coat finish
  • AWF™ compressor fluid

  • Fork lift pockets
  • Block heater
  • Hose reels (single and dual) and pneumatic hoses
  • Spark arrestor muffler
  • Mechanical parking brakes
  • Ball hitch
  • Air filter maintenance indicators

Click to download Datasheet

Sulliar 375HH Tier 3 Portable

The Sullair 375HH rotary screw portable air compressor delivers 375 cfm at 200 psig or 10.6 m3/min at 14 bar. Unit is designed for reliability and total accessibility featuring large side doors for easy maintenance, and is powered by a Tier 3 emissions compliant John Deere engine. Mounting option is 2-wheel, single axle. Enclosure is made of durable powder coated Galvanneal sheet metal with composite end caps. Other features include independent rubber torsion suspension, wheel bearing grease fittings, and a lockable curbside instrument panel. The compressors feature a pneumatic inlet valve and 0 to 100% capacity control.

  • 375 cfm (10.6 m3/min, 177 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engine: Tier 3 John Deere 140 hp (104 kW)

  • Rotary Screw Compressor
  • Removable Multi-Piece Canopy
  • Adjustable Height Hitch
  • E-Z Lube Axle
  • Large Tool Box Compartment
  • Curbside Instrument Panel
  • SSAM—Shutdown System and Annunciation Module
  • Battery Disconnect Switch
  • Idle Warm-up Switch
  • Rocker Type Start Switch
  • Emergency Stop
  • Protective Shutdown Switches
  • Fuel/Water Separator
  • Three Stage Air Filters
  • 0 to 100% Capacity Control
  • Pneumatic Inlet Valve
  • AWF™ Compressor Fluid
  • Durable Powder Coat Finished
  • Wide Track
  • Galvanneal Sheet Metal
  • Recessed Tail Lights
  • Rear Bumper

  • Aftercooler
  • Air filter maintenance indicators
  • Ball hitch
  • Block heater
  • Brakes
  • Cold weather starting aid
  • Ether starting aid
  • Filtration for instrument quality air
  • Fuel level gauge
  • Hose reels, single and dual
  • Mechanical parking brakes
  • Spark arrestor
  • Special paint

Click to download Datasheet

Sulliar 375HH AF System Tier 3 Portable

The Sullair 375HH AF System delivers 375 cfm at 200 psig or 10.6 m3/min at 14 bar of aftercooled and filtered compressed air that meets or exceeds ISO 8573-1: Class 1.7.1 quality standards.

The AF System consists of a specially designed Sullair portable compressor with a built-in high-capacity, low-approach aftercooler, a water-condensate trap and a highly efficient contaminant removal system.

The contaminant removal system includes primary and secondary filters with condensate traps. The primary filter is a coalescing type filter which captures and removes particles down to 1.0 micron and larger in diameter, and maximum remaining aerosol content at 0.5 PPM. The secondary filter is a high efficiency coalescing type which removes particulate to 0.01 micron and larger in diameter, and maximum aerosol content of 0.01 PPM.

  • 375 cfm (10.6 m3/min, 177 l/s)
  • 200 psig (14 bar)
  • Available mounting options: 2-wheel or less running gear
  • Available engine: Tier 3 John Deere 140 hp (104 kW)

  • Rotary Screw Compressor
  • Instrument Quality Air as per ISO 8573.1:Class 1.7.1
  • Low-approach Aftercooler and Moisture Separator
  • Primary and Secondary Filtration
  • Environmentally Friendly
  • 0 to 100% Capacity Control
  • Two-stage Air Filters
  • Curbside Instrument Panel
  • Rocker Type Start Switch
  • Idle Warm-up Valve
  • SSAM—Shutdown System and Annunciation Module
  • Protective Shutdown Switches
  • AWF™ Compressor Fluid
  • Bumper with Recessed Tail Lights

  • Differential Pressure Shutdown System for Filters
  • Air filter maintenance indicators
  • Ball hitch
  • Block heater
  • Brakes
  • Cold weather starting aid
  • Ether starting aid
  • Filtration for instrument quality air
  • Fuel level gauge
  • Hose reels, single and dual
  • Mechanical parking brakes
  • Spark arrestor
  • Special paint

Click to download Datasheet

 
© 2012 Diversified Air Systems Inc | Powered by OCRONusa.com