• Home
  • Sullair DEX Desiccant Dryer

Sullair DEX Desiccant Dryer

Sullair DEX
Desiccant Externally Heated Dryer

 

The dual tower design of the DEX dryers allows for continuous absorption of water from compressed air by using a desiccant. Drying is accomplished by passing wet compressed air through the desiccant bed of one of the towers where moisture is absorbed. Regeneration of the desiccant is accomplished with the use of a low watt density heater. The heated air has a greater affinity to absorb moisture. When passed through the regenerating tower at near ambient pressure, the heated air flows in a counter direction through the wet bed, removing moisture previously absorbed by the desiccant.

 

  • 200 to 3500 acfm (5.66 to 99.11 m3/min)

  • Adjustable purge valves
  • ASME/CRN code welded pressure vessels
  • Easy front access control panel
  • Fail safe design in event of power failure
  • Field adjustable drying cycle time
  • Fully automatic self contained dryer
  • High outlet temperature shut off and alarm
  • High quality valves
  • Insulated heater housing and piping
  • Low-watt density heater
  • Pilot air filter
  • PLC control and display
  • Purge flow indicator
  • Robust steel frame with floor stand
  • Safety back-up contactors
  • Safety heater thermostat
  • Separate drain and fill port
  • Separate safety pressure relief valve for each tank
  • Stainless steel inlet/outlet diffusers
  • Thermostatically controlled heating
  • Tower pressure gauges
  • UL/CUL electrical certified

  • 3 valve and 9 valve bypass options
  • -4°F and -100°F pressure dew point
  • Demand Cycle Control with Dew point monitor
  • Failure to shift alarm
  • High heater remote temperature alarm
  • Low ambient package
  • Low bed temperature shut off with light and contact
  • Microprocessor based controls/Modbus
  • NEMA 4, SS NEMA 4x enclosures
  • Optional voltage
  • Pre-piped filter and bypass packages
  • Purge flow meter
  • Visual moisture indicator
  • Stainless Steel Control Tubing
  • Local Mounted INlet and Outlet Pressure and Temperature gauges
  • Stainless Steel ID Tag

Click Image to Download Datasheet

© 2012 Diversified Air Systems Inc | Powered by OCRONusa.com